|
- Item 10: Purge control solenoid valve
|
|
OK: Operating sound can be heard and the valve vibrates
|
|
Q.
Is the check result normal?
|
|
Intermittent malfunction (Refer to GROUP 00 - How to Use Troubleshooting/Inspection
Service Points - How to Cope with Intermittent Malfunctions ).
|
|
|
|
- Purge control solenoid valve connector check.
- Disconnect connector, and measure at solenoid valve side.
- Resistance between terminals.
|
|
Q.
Is the check result normal?
|
|
Repair or replace the connector, or replace the purge control solenoid valve.
|
|
|
|
- Disconnect connector, and measure at harness side.
- Ignition switch: "ON"
- Voltage between terminal power supply line and body earth.
|
|
Q.
Is the check result normal?
|
|
Repair or replace the connector, or check
and repair harness between purge control solenoid valve connector terminal and engine control
relay connector terminal.
- Check power supply line for open/short circuit.
|
|
|
|
- Disconnect connector, and measure at harness side.
- Ignition switch: "ON"
- Voltage between terminal PURG and body earth.
|
|
Q.
Is the check result normal?
|
|
Repair or replace the connector, or check
and repair harness between purge control solenoid valve connector terminal and engine-ECU connector
terminal PURG.
- Check output line for open/short circuit.
|
|
|
|
- Check output line for damage.
|
|
Q.
Is the check result normal?
|
|
Repair or replace the connector, or repair the damaged harness wire.
|
|
|
|
- Check power supply line for damage.
|
|
Q.
Is the check result normal?
|
|
Repair or replace the connector, or repair the damaged harness wire.
|
|
|
|
- Item 10: purge control solenoid valve
|
|
OK: Operating sound can be heard and the valve vibrates
|
|
Q.
Is the check result normal?
|
|
Intermittent malfunction (Refer to GROUP 00 - How to Use Troubleshooting/Inspection
Service Points - How to Cope with Intermittent Malfunctions ).
|
|
|