REMOVAL AND INSTALLATION



Pre-removal and Post-installation Operation
  • Engine Upper Cover Removal and Installation (Refer to ).


<CAMSHAFT POSITION SENSOR>



Removal steps


1.
Camshaft position sensor connector


2.
Camshaft position sensor


3.
O-ring

<CRANK ANGLE SENSOR>



Removal steps


·
Air cleaner intake duct (Refer to GROUP 15 - Air Cleaner Assembly )


·
Intercooler outlet air hose D (Refer to GROUP 15 - Intercooler )
<<A>>

1.
Crank angle sensor and crank angle sensor connector


2.
Crank angle sensor connector


3.
Crank angle sensor


4.
O-ring

REMOVAL SERVICE POINT



<<A>> CRANK ANGLE SENSOR AND CRANK ANGLE SENSOR CONNECTOR REMOVAL


With the crank angle sensor connector connected, remove the crank angle sensor and disconnect the connector.