|
- Check whether the user uses the booster cable to start the engine.
|
|
Q.
Have you ever used the booster cable to start the engine?
|
|
Delete the diagnosis code and finish the check.
|
|
|
|
- Check battery (Refer to GROUP 54A -
Battery -
On-vehicle Service -
Battery
Test ).
|
|
Q.
Is the check result normal?
|
|
- Drive belt tension check (Refer to GROUP 11E -
On-vehicle Service -
Drive
Belt Tension Check and Adjustment )
|
|
Q.
Is the check result normal?
|
|
- Check output line for open/short circuit and damage.
|
|
Q.
Is the check result normal?
|
|
Repair or replace the connector, or repair the damaged harness wire.
|
|
|
|
- Check output line for open/short circuit and damage.
|
|
Q.
Is the check result normal?
|
|
Repair or replace the connector, or repair the damaged harness wire.
|
|
|
|
Q.
Is the check result normal?
|
|
Repair or replace the connector, or repair the damaged harness wire.
|
|
|
|
- Reconfirmation of diagnosis code.
|
|
Q.
Is the diagnosis code set?
|
|
Intermittent malfunction (Refer to GROUP 00 -
How to Use Troubleshooting/Inspection
Service Points -
How to Cope with Intermittent Malfunctions ).
|
|
|
|
- After replacing the drive belt, reconfirm whether the diagnosis code is set.
|
|
Q.
Is the diagnosis code set?
|
|
- After replacing the alternator, reconfirm whether the diagnosis code is set.
|
|
Q.
Is the diagnosis code set?
|