DISASSEMBLY AND REASSEMBLY <4B1, 4J1>

			Disassembly steps
<<A>>	>>B<<	1.	Fuel gauge unit
		2.	Fuel gauge unit gasket
		3.	Fuel pump bracket plate
<<B>>	>>A<<	4.	Suction hose connection
<<B>>	>>A<<	5.	Fuel pump and gauge assembly
		6.	Fuel pump and gauge assembly gasket
		7.	Clip
		8.	Fuel tank lower protector
		9.	Fuel tank

DISASSEMBLY SERVICE POINTS

<<A>> FUEL GAUGE UNIT REMOVAL

caution

Pay attention not to damage the gauge unit and the float of fuel gauge unit when removing it from the fuel tank.

<<B>> SUCTION HOSE/FUEL PUMP AND GAUGE ASSEMBLY REMOVAL

caution

Pay attention not to damage the gauge unit and the float of fuel pump and gauge assembly when removing it from the fuel tank.

While removing the fuel pump and gauge assembly from the fuel tank, disconnect the suction hose from the fuel pump and gauge assembly to remove the fuel pump and gauge assembly from the fuel tank.

REASSEMBLY SERVICE POINTS

>>A<< FUEL PUMP AND GAUGE ASSEMBLY/SUCTION HOSE INSTALLATION

caution

Pay attention not to damage the gauge unit and the float of fuel pump and gauge assembly when installing it to the fuel tank.
Pay attention to prevent the float of fuel pump and gauge assembly from being trapped by the suction hose inside the fuel tank.
When installing the fuel pump and gauge assembly to the fuel tank, check that the gauge moving area moves smoothly.

While inserting the fuel pump and gauge assembly into the fuel tank, connect the suction hose to the fuel pump and gauge assembly to install the fuel pump and gauge assembly to the fuel tank.

>>B<< FUEL GAUGE UNIT INSTALLATION

caution

Pay attention not to damage the gauge unit and the float of fuel gauge unit when installing it to the fuel tank.