DISASSEMBLY AND REASSEMBLY <4N1>

			Disassembly steps
		1.	Fuel tank bracket and connector housing assembly
		2.	Fuel pump bracket plate
<<A>>	>>B<<	3.	Suction hose connection
<<A>>	>>B<<	4.	Fuel tank pump and gauge assembly
		5.	Fuel tank pump and gauge gasket
<<B>>	>>A<<	6.	Fuel tank gauge unit
		7.	Fuel tank gauge unit gasket
		8.	Fuel tank lower protector
		9.	Fuel tank

DISASSEMBLY SERVICE POINTS

<<A>> SUCTION HOSE/FUEL TANK PUMP AND GAUGE ASSEMBLY REMOVAL

caution

Pay attention not to damage the fuel gauge unit and float of the fuel tank pump and gauge assembly when removing the fuel tank pump and gauge assembly from the fuel tank.

While removing the fuel tank pump and gauge assembly from the fuel tank, disconnect the suction hose from the fuel tank pump and gauge assembly to remove the fuel tank pump and gauge assembly from the fuel tank.

<<B>> FUEL TANK GAUGE UNIT REMOVAL

caution

Pay attention not to damage the gauge unit and the float of fuel tank gauge unit when removing the fuel tank gauge unit from the fuel tank.

REASSEMBLY SERVICE POINTS

>>A<< FUEL TANK GAUGE UNIT INSTALLATION

caution

Pay attention not to damage the gauge unit and the float of fuel tank gauge unit when installing the fuel tank gauge unit to the fuel tank.

>>B<< FUEL TANK PUMP AND GAUGE ASSEMBLY/SUCTION HOSE INSTALLATION

caution

Pay attention not to damage the gauge unit and the float of fuel tank pump and gauge assembly when installing it to the fuel tank.
Pay attention to prevent the float of fuel tank pump and gauge assembly from being trapped by the suction hose inside the fuel tank.
When installing the fuel tank pump and gauge assembly to the fuel tank, check that the gauge moving area moves smoothly.

While inserting the fuel tank pump and gauge assembly into the fuel tank, connect the suction hose to the fuel tank pump and gauge assembly to install the fuel tank pump and gauge assembly to the fuel tank.