CODE NO. P1574:
Engine-ECU and Its Related Components
DIAGNOSIS CODE SET CONDITIONS
This diagnosis code is set when there is an failure in the engine-ECU and its related
components.
PROBABLE CAUSES
Malfunction of the MPI system.
Malfunction of the engine-ECU.
DIAGNOSIS PROCEDURE
STEP 1. Check the MPI system diagnosis code.
Using M.U.T.-III, perform MPI system diagnosis code (Refer to GROUP 13A - Troubleshooting,
Diagnosis Function <4B1>, GROUP 13C - Troubleshooting,
Diagnosis Function <4J1>).
Q.
Is any diagnosis code set?
Repair the MPI system (Refer to GROUP 13A - Troubleshooting, Inspection
Chart for Diagnosis Code <4B1>, GROUP 13C - Troubleshooting, Inspection
Chart for Diagnosis Code <4J1>). Then go to Step 3.
Go to Step 2.
STEP 2. Read the diagnosis code.
(1)Use the M.U.T.-III, erase the diagnosis code of the cruise control system.
(2)Turn the ignition switch to the "ON" position, and press the cruise control ON/OFF
switch to turn the cruise control system to ON (the cruise control indicator lamp <standard meter> or
the cruise control display screen <high contrast meter> is turned on).
(3)After turning the cruise control system to ON, when 2 minutes or more has elapsed
without operating the cruise control switches, read the diagnosis code of the cruise control
system (Refer to ).
Q.
Is diagnosis code No. P1574 set?
Replace the engine-ECU (Refer to GROUP 13A - Engine-ECU <4B1>,
GROUP 13C - Engine-ECU <4J1>). Then go to Step
3.
It can be assumed that this malfunction is intermittent (Refer to GROUP 00 - How
to Use Troubleshooting/Inspection Service Points, How to Cope with Intermittent Malfunction ).
STEP 3. Read the diagnosis code.
(1)Use the M.U.T.-III, erase the diagnosis code of the cruise control system.
(2)Turn the ignition switch to the "ON" position, and press the cruise control ON/OFF
switch to turn the cruise control system to ON (the cruise control indicator lamp <standard meter> or
the cruise control display screen <high contrast meter> is turned on).
(3)After turning the cruise control system to ON, when 2 minutes or more has elapsed
without operating the cruise control switches, read the diagnosis code of the cruise control
system (Refer to ).