No. 2 EXHAUST GAS TEMPERATURE SENSOR (CATALYST TEMPERATURE) CHECK

2.Measure the resistance between terminal No. 1 and No. 2. Standard value: 75 - 190 kΩ (at 20°C) 3.Remove the No. 2 exhaust gas temperature sensor (catalyst temperature). 4.Measure the resistance while heating the sensor using a hair drier. Normal condition: Temperature (°C) Resistance (kΩ) Higher Smaller 5.If the value deviates from the standard value or the resistance remains unchanged, replace the No. 2 exhaust gas temperature sensor (catalyst temperature). 6.Install the No. 2 exhaust gas temperature sensor (catalyst temperature) and tighten it to the specified torque. Tightening torque: 30 ± 5 N·m