CLUTCH PEDAL CHECK

1.Measure the clutch pedal looseness (A). Standard value (A): 4 mm or less 2.When the clutch pedal looseness is not within the standard value, the clutch pedal assembly may be faulty. In this case, check the clutch pedal assembly, and replace it if necessary.

3.Check that the clutch pedal play (B), the clutch pedal height (C) and the clearance (D) between the clutch pedal and the pedal stopper when the clutch is disengaged are within the standard value. Standard value (B): 4 - 9 mm Standard value (C): 99 - 105 mm <4J1-LHD> 110 - 116 mm <4N1-LHD> 77 - 82 mm <4N1-RHD> Standard value (D): 15 mm or more <LHD> 11 mm or more <RHD> 4.When the clutch pedal play, clutch pedal height and the clearance between the clutch pedal and pedal stopper when the clutch is disengaged are not within the standard value, the air may be intruded into the hydraulic system, or either the clutch master cylinder or the concentric slave cylinder may be faulty. In this case, perform air bleeding, or check the clutch master cylinder or the concentric slave cylinder, and replace it if necessary.