REMOVAL AND INSTALLATION <F5MBB>



Pre-removal Operation
  • Air Cleaner Assembly Removal (Refer to GROUP 15 - Air Cleaner >).
  • Battery and Battery Tray Removal (Refer to GROUP 54A - Battery ).
  • Clutch Fluid Draining

Post-installation Operation
  • Battery and Battery Tray Installation (Refer to GROUP 54A - Battery ).
  • Air Cleaner Assembly Installation (Refer to GROUP 15 - Air Cleaner ).
  • Clutch Fluid Supplying
  • Clutch Bleeding (Refer to ).
  • Clutch Pedal Check (Refer to ).





Clutch line removal steps


1.
Hose clip A
<<A>>
>>A<<
2.
Clutch tube assembly A


3.
Hose clip B
<<A>>
>>A<<
4.
Clutch tube assembly B



Concentric slave cylinder adapter removal steps


·
Transmission assembly (Refer to GROUP 22A, Transmission Assembly ).
<<A>>
>>A<<
5.
Concentric slave cylinder adapter

REMOVAL SERVICE POINT



<<A>> CLUTCH TUBE ASSEMBLY DISCONNECTION/CONCENTRIC SLAVE CYLINDER ADAPTER REMOVAL





caution
  • Do not remove the O-rings and the clips from the clutch tube assembly, the clutch master cylinder, the concentric slave cylinder adapter and the concentric slave cylinder.
  • If the O-rings or the clips of the clutch tube assembly, the clutch master cylinder, the concentric slave cylinder adapter and the concentric slave cylinder are damaged, replace each assembly.

INSTALLATION SERVICE POINT



>>A<< CONCENTRIC SLAVE CYLINDER ADAPTER INSTALLATION/CLUTCH TUBE ASSEMBLY CONNECTION





caution
  • When connecting each part, check that the O-ring and clip are not damaged.
  • If any connection area or O-ring is dirty, clean with the clutch fluid.
Assemble the clip to the clutch master cylinder, clutch tube assembly B, and concentric slave cylinder. Then, connect the clutch tube assembly A and concentric slave cylinder adapter.