|
caution |
- Do not remove the O-rings and the clips from the clutch tube assembly, the
clutch master cylinder, the concentric slave cylinder adapter and the concentric slave cylinder.
- If the O-rings or the clips of the clutch tube assembly, the clutch master cylinder,
the concentric slave cylinder adapter and the concentric slave cylinder are damaged, replace
each assembly.
|
|
|
caution |
- When connecting each part, check that the O-ring and clip are not damaged.
- If any connection area or O-ring is dirty, clean with the clutch fluid.
|
Assemble the clip to the clutch master cylinder, clutch tube assembly B, concentric slave
cylinder adapter, and concentric slave cylinder. Then, connect the clutch tube assembly and concentric
slave cylinder adapter.
|