)
)
)
2.Remove the drain plug and gasket, and drain the oil.
3.Tighten the drain plug and new gasket, to the specified torque.
Tightening torque:
49 ± 19 N·m <F5MBB>
39 ± 11 N·m <F6MBA/W6MBA>
4.Fill with MITSUBISHI MOTORS GENUINE NEW MULTI GEAR OIL API classification GL-3 SAE 75W-80 until the level comes to the lower portion of filler plug hole.
Quantity:
2.5 L <F5MBB>
2.0 L <F6MBA/W6MBA>
5.Install the filler plug and new gasket, then tighten them to the specified torque.
Tightening torque:
49 ± 19 N·m <F5MBB>
39 ± 11 N·m <F6MBA/W6MBA>