|
1.Remove the drain plug and gasket, to drain the transfer oil. 2.Install the drain plug and new gasket, and tighten to the specified torque. Tightening torque: 32 ± 2 N·m 3. Remove the filler plug and gasket, and fill the transfer oil up to the lower edge
of the filler plug hole. Brand name: MITSUBISHI MOTORS GENUINE super hypoid gear oil API classification GL-5
SAE80 Quantity: 0.47 L 4.Install the filler plug and new gasket, and tighten to the specified torque. Tightening torque: 32 ± 2 N·m
|