|
1.Using special tools, support the tapered roller bearing, and then set them on the
press.
- Bearing remover (MD998917)
- Crankshaft front oil seal installer (MB991395)
2.Push down on the differential case with the press and remove the tapered roller bearing.
|
|
1.Using special tools, support the speedometer drive gear, and then set them on the
press.
- Bearing remover (MD998917)
- Crankshaft front oil seal installer (MB991395)
2.Push down on the differential case with the press and remove the speedometer drive
gear.
|
|
1.Using special tools, remove the tapered roller bearing.
- Side bearing puller (MB990810)
- Claw (MD999566)
- Crankshaft front oil seal installer (MB991395)
2.Push down on the differential case with the press and remove the tapper roller bearing.
|
|
Using special tools, install the tapered roller bearing.
- Installer cap (MD998812)
- Oil seal installer (MB992150)
|
|
Using special tool Rear suspension bushing base (MB990891), install the speedometer drive
gear.
|
|
Using special tool Bearing installer (MB992138), install the tapered roller bearing.
|
)
)
)
)
)
)
)