|
1.Using special tools, remove the cylindrical roller bearing (outer race).
- Slide hammer (MB990211)
- Slide hammer puller (MB992039)
|
|
1.Using special tools, remove the tapered roller bearing outer race.
- Slide hammer (MB990211)
- Slide hammer puller (MB992039)
|
|
1.Using special tools, remove the tapered roller bearing outer race.
- Slide hammer (MB990211)
- Slide hammer puller (MB992039)
|
|
Using special tool Extension housing seal installer (MD998550), install the oil seal Specified grease: MITSUBISHI MOTORS GENUINE Part No. 0101011 or equivalent
|
|
Using special tool Arm bush remover and installer (MB992176), install the oil seal. Specified grease: MITSUBISHI MOTORS GENUINE Part No. 0101011 or equivalent
|
|
Install the extension housing oil baffle to the clutch housing assembly with its projections
fitted in the slots in the clutch housing assembly.
|
|
Using special tools, install the tapered roller bearing outer race.
- Bush remover and installer base (MB991445)
- Installer bar (MB990938)
|
|
Install the output shaft cover to the clutch housing assembly with its projections fitted
in the slots in the clutch housing assembly. Make sure that the oil hole in the output shaft
cover is up as shown.
|
|
Using special tool Differential oil seal installer (MB990699) and install the tapered
roller bearing outer race.
|
|
Using special tool Oil seal installer (MD999547), install the cylindrical roller bearing
(outer race).
|