|
1.Remove the drain plug and gasket, to drain the transfer oil. 2.Install the drain plug and new gasket, and tighten to the specified torque. Tightening torque: 32 ± 2 N·m 3. Remove the filler plug and gasket, and fill the transfer oil up to the lower edge
of the filler plug hole.
Brand name: MITSUBISHI MOTORS GENUINE super hypoid
gear oil API classification GL-5 SAE80 Filling amount: 0.47 L
4.Install the filler plug and new gasket, and tighten to the specified torque. Tightening torque: 32 ± 2 N·m
|