Symptom
|
Inspection procedure No.
|
Reference page
|
A/T-ECU cannot communicate with M.U.T.-III
|
1
|
|
The vehicle does not run at any range (including low
power).
|
2
|
|
The vehicle does not run at the "D" or the "R" range.
|
3
|
|
The acceleration is poor.
|
4
|
|
The vehicle moves at the "N" range.
|
5
|
|
Gears cannot be shifted at all, or a certain gear shift
(1st to 2nd, 2nd to 3rd, etc.) is not made.
|
6
|
|
The torque converter is not locked up.
|
7
|
|
The clutch slips when the vehicle starts or during gear
shift.
|
8
|
|
The engine brake is not applied.
|
9
|
|
The shift shock is large at a certain gear shift. (1st
to 2nd, 2nd to 3rd, etc.)
|
10
|
|
The select shock is large when the selector lever position
is shifted from "N" to "D", and "N" to "R."
|
11
|
|
Abnormal sound occurs during idling.
|
12
|
|
Abnormal sound occurs during driving.
|
13
|
|
Abnormal sound occurs during gear shift.
|
14
|
|
Engine stall
|
15
|
|
Oil leaks from the air breather.
|
16
|
|
The starter does not rotate at the "P" or "N" range.
(The engine does not start.)
|
17
|
|