DIAGNOSIS PROCEDURE |
STEP 1. Is the diagnosis code for engine-ECU displayed? |
Check that the failure related to the engine does not occur. |
Q.
Is the check result normal?
|
Go to Step 2. |
|
Repair or replace the failure section. |
|
STEP 2. Check the throttle position sensor and engine-ECU-side main unit and connector wiring. |
Q.
Is the check result normal?
|
Go to Step 3. |
|
Repair or replace the failure section. |
|
STEP 3. Erase the diagnosis code, and drive the vehicle for a while. |
Check that the normal code is displayed. |
Q.
Is the check result normal?
|
The procedure is complete. |
|
Return to Step 1. |
|