Code No. P1773: ABS Information (ABS/ASC)

DIAGNOSIS CODE SET CONDITIONS

When approx. 1 second has elapsed after A/T-ECU started, the ABS/ASC abnormality signal is received via the CAN communication with vehicle speed at 55 km/h or more.

PROBABLE CAUSES

Malfunction of the CAN
Malfunction of the ABS/ASC-ECU

DIAGNOSIS PROCEDURE

STEP 1. Check the ABS/ASC-ECU.

Check if a failure related to ABS/ASC-ECU occurs.

Q. Is the check result satisfactory?

	Go to Step 2.

	Repair or replace the failure section.

STEP 2. Check the ABS/ASC-ECU connector pin terminal and the connection status.

Q. Is the check result normal?

	Go to Step 3.

	Repair or replace the failure section.

STEP 3. Erase the diagnosis code, and drive the vehicle for a while.

Check that the normal code is displayed.

Q. Is the check result normal?

	The procedure is complete.

	Return to START.