Inspection Procedure 5: The vehicle moves at the "N" range.


PROBABLE CAUSES



DIAGNOSIS PROCEDURE

STEP 1. Check the engine performance.

Q. Is the check result normal?
Go to Step 2.
Repair the failure, and perform adjustment.

STEP 2. Compare with another same model vehicle.

Q. Is there a difference from the same model vehicle?
Go to Step 3.
The procedure is complete.

STEP 3. Check the transmission control cable.
Check the installation status of transmission control cable and inhibitor switch.

Q. Is the check result normal?
Go to Step 4.
Adjust the installation status of transmission control cable and inhibitor switch. .

STEP 4. Check the A/T fluid.
Check the A/T fluid for seizure, fouling, and foreign material.

Q. Is the check result normal?
The procedure is complete.
Go to Step 5.

STEP 5. Remove the transmission assembly from the vehicle.
Disassemble and check the transmission assembly to check if there is a foreign material inside.

Q. Is the check result satisfactory?
Replace the transmission assembly.
Replace the failure part.