|
Check the installation status of transmission control cable and inhibitor switch.
|
|
Q.
Is the check result normal?
|
|
Adjust the installation status of transmission control cable and inhibitor switch .
|
|
|
|
Check the A/T fluid for seizure, fouling, and foreign material.
|
|
Q.
Is the check result normal?
|
|
Check if the A/T fluid level is adequate.
|
|
Q.
Is the check result normal?
|
|
Check and repair the leakage point of the A/T fluid, add the A/T
fluid, and then go to Step 4.
|
|
|
|
Q.
Is the check result normal?
|
|
The procedure is complete.
|
|
|
|
Disassemble and check the transmission assembly to check if there is a foreign material
inside.
|
|
Q.
Is the check result satisfactory?
|
|
Replace the transmission assembly.
|
|
|
|
Replace the failure part.
|
|
|