DIAGNOSIS PROCEDURE |
STEP 1. Check the A/T fluid. |
Check the A/T fluid for burning, fouling, and foreign material. |
Q.
Is the check result normal?
|
Go to Step 2. |
|
Replace the transmission assembly. |
|
STEP 2. Check the A/T fluid level. |
Check if the A/T fluid level is adequate. |
Q.
Is the check result normal?
|
Go to Step 3. |
|
Check and repair the leakage point of the A/T fluid, add the A/T
fluid, and then go to Step 3. |
|
STEP 3. Perform a hydraulic test. |
Refer to . |
Q.
Is the check result normal?
|
The procedure is complete. |
|
Replace the transmission assembly. |
|