Go to Step 2.
DIAGNOSIS PROCEDURE |
STEP 1. M.U.T.-III CAN bus diagnostics. |
| Use M.U.T.-III to perform the CAN bus diagnosis. |
Q.
Is the check result normal?
|
| Go to Step 2. |
|
 Repair the CAN bus line (Refer to GROUP 54C - Troubleshooting  ). |
|
STEP 2. Check the diagnosis code. |
| Check the ASC diagnosis code. (Refer to GROUP 35C - Troubleshooting ). |
Q.
Is the diagnosis code set?
|
| Check and repair the relevant diagnosis code system. |
|
| Go to Step 3. |
|
STEP 3. Perform the troubleshooting for diagnosis code No. P0753: low clutch linear solenoid valve and diagnosis code No. P0731: 1st gear incorrect ratio. |
| Check whether the diagnosis code is reset. |
Q.
Is diagnosis code No.P1796 set?
|
| Replace the A/T-ECU. |
|
| This diagnosis is complete. |
|