Code No. P0725: Malfunction of Engine Speed

CVT-ECU detects malfunction of engine speed received from the engine-ECU by comparing the primary pulley speed with the secondary pulley speed.

Locked up with the primary pulley speed of 1,000 r/min or more and with the engine speed of 450 r/min or less
CVT-ECU detects the malfunction in the engine speed by comparing it with the primary pulley speed.
CAN communication error occurs between engine-ECU and CVT-ECU.

DIAGNOSTIC PROCEDURE

Use M.U.T.-III to perform the CAN bus diagnosis.

	Go to Step 2.

	Go to "CAN Troubleshooting."

Check if the engine-related diagnosis code is set.

	Go to Step 3.

	Go to "Engine Troubleshooting."

	Intermittent malfunction

	Replace CVT-ECU.