DIAGNOSTIC PROCEDURE |
STEP 1. M.U.T.-III CAN bus diagnostics |
Use M.U.T.-III to perform the CAN bus diagnosis. |
Q.
Is the check result normal?
|
Go to Step 2 |
|
Repair the CAN bus lines (Refer to GROUP 54C - Troubleshooting, Diagnosis Code Chart ). |
|
STEP 2. M.U.T.-III diagnosis code |
Check if the engine-related diagnosis code is set. |
Q.
Is diagnosis code set?
|
Diagnose the engine control system. |
|
Go to Step 3 |
|
STEP 3. Symptom recheck after erasing diagnosis code |
Q.
Is the check result normal?
|
Intermittent malfunction |
|
Replace CVT-ECU. |
|