TROUBLE SYMPTOM CHART


caution During diagnosis, a diagnosis code associated with other system may be set when the ignition switch is turned on with connector(s) disconnected. On completion, confirm all systems for diagnosis code(s). If diagnosis code(s) are set, erase them all.
Trouble symptom
 Inspection procedure number
 Reference page
CVT-ECU cannot communicate with M.U.T.-III <Vehicles without Auto Stop & Go (AS&G) System>
 1
CVT-ECU cannot communicate with M.U.T.-III <Vehicles with Auto Stop & Go (AS&G) System>
Vehicle creeps in the "N" range
 2
Shock is experienced during "N" to "D" and/or "N" to "R" shifting operation
 3
Poor acceleration or incomplete shifting operation
 4
Gears cannot be changed with the paddle shift
 5
The fluid temperature warning lamp illuminates too frequently
 6
DC/DC converter power supply system check <Vehicles with Auto Stop & Go (AS&G) System>
 7