Inspection Procedure 2: Vehicle Creeps in the N Range.


SYMPTOMS


Engine torque is transferred to the driveshaft in the N range, and the vehicle consequently moves forward or rearward.

PROBABLE CAUSES



DIAGNOSTIC PROCEDURE

STEP 1. M.U.T.-III data list
Item 49: Inhibitor SW
Check that the service data changes when the selector lever is moved to all ranges.

Q. Is the check result normal?
Go to Step 2.
Go to Step 4.

STEP 2. Check of the inhibitor switch and shift control cable
Refer to .

Q. Is the check result normal?
Go to Step 3.
Adjust the inhibitor switch and the control cable.

STEP 3. Retest the system.

  • Replace CVT-ECU.
  • Recheck the trouble symptom.

Q. Does the malfunction take place again?
Replace the CVT assembly.
The inspection is complete.

STEP 4. Inhibitor switch continuity check
Refer to .

Q. Is the check result normal?
Go to Step 3.
Replace the inhibitor switch.