Inspection Procedure 3: Shock is experienced during N to D and/or N to R shifting operation.

SYMPTOMS

Deep shock is experienced when the selector lever is moved from the N to R range or from the N to D range.

PROBABLE CAUSES

Abnormal line pressure
Malfunction of CVT-ECU
Malfunction of CVT assembly

DIAGNOSTIC PROCEDURE

STEP 1. Engine idling speed check

Q. Is the check result normal?

	Go to Step 2.

	Refer to the "Engine troubleshooting."

STEP 2. Line pressure check

Carry out "hydraulic test"(Refer to

).

Q. Is the check result normal?

	Go to Step 3.

	Repair according to the hydraulic pressure diagnosis table.

STEP 3. Retest the system.

Replace CVT-ECU.
Recheck the trouble symptom.

Q. Does the malfunction take place again?

	Replace the CVT assembly.

	The inspection is complete.