Inspection Procedure 5: Gears cannot be Changed with the Paddle Shift.

SYMPTOMS

The transmission does not upshift or downshift when the paddle shift is operated.

PROBABLE CAUSES

Malfunction of paddle shift switch
Damaged wiring harness and connectors
Malfunction of CVT-ECU

DIAGNOSTIC PROCEDURE

STEP 1. M.U.T.-III data list

Item 54: Paddle shift SW (UP)
Item 55: Paddle shift SW (DOWN) (Refer to Service Data Reference Table .)

Q. Is the check result normal?

	Intermittent malfunction

	Go to Step 2.

STEP 2. Paddle shift switch single unit check

Refer to

.

Q. Is the check result normal?

	Go to Step 3.

	Replace the paddle shift assembly.

STEP 3. Check for open circuit in PDDW, PDUP line between the CVT-ECU connector and the paddle shift switch connector

Q. Is the check result normal?

	Go to Step 4.

	Repair the connector(s) or wiring harness.

STEP 4. Retest the system.

Q. Is the check result normal?

	Intermittent malfunction

	Replace CVT-ECU.