TRANSFER OIL REPLACEMENT <4WD>




1.Remove the drain plug and gasket, to drain the transfer oil.
2.Install the drain plug and new gasket, and tighten to the specified torque.
Tightening torque: 32 ± 2 N·m
3. Remove the filler plug and gasket, and fill the transfer oil up to the lower edge of the filler plug hole.

    Transfer oil: MITSUBISHI MOTORS GENUINE super hypoid gear oil API classification GL-5 SAE80
    Filling amount: 0.47 L
4.Install the filler plug and new gasket, and tighten to the specified torque.
Tightening torque: 32 ± 2 N·m