REMOVAL AND INSTALLATION
caution
After replacing the CVT-ECU, bleed the air from the electric oil pump.
To store the change gear ratio status of the CVT assembly in the CVT-ECU memory, drive the vehicle at 3 km/h or faster after replacing the CVT-ECU.
Pre-removal and post-installation operation
ETACS-ECU removal and installation (Refer to GROUP 54A - ETACS-ECU
.)
Removal steps
1.
CVT-CCU
2.
DC/DC converter and DC/DC converter bracket assembly
3.
DC/DC converter
4.
DC/DC converter bracket
5.
CVT-ECU bracket
.))