ELECTRIC OIL PUMP RELAY CHECK <VEHICLES WITH AS&G SYSTEM>



1.Remove the electric oil pump relay.

2.Use a jumper wire to connect the positive battery terminal (+) to the electric oil pump relay terminal No. 2, and the negative battery terminal (-) to the terminal No. 1.
3.Check for continuity between the electric oil pump relay terminals No. 3 and No. 4.
Jumper wire
Continuity between terminals No. 3 and No. 4
Connect
Yes (2Ω or less)
Disconnect
No
4.If not as specified, replace the electric oil pump relay.