SELECTOR LEVER ASSEMBLY CONTINUITY CHECK



SWITCH CHECK



Item
Selector lever position
Terminal number
Continuity
P position detect switch <Vehicles with KOS>
P
4 - 6
No continuity
Other than above
4 - 6
Continuity
P position detect switch <Vehicles without KOS>
P
5 - 6
No continuity
Other than above
5 - 6
Continuity
Ds position switch <Vehicles without paddle shift>
Ds, L
8 - 9
Continuity
Other than above
8 - 9
No continuity

KEY LOCK RELAY CHECK <VEHICLES WITHOUT KOS>


1.Shift the selector lever to P position.
2.Use a jumper wire to connect terminal No. 5 of the selector lever assembly connector to the battery (+) terminal, terminal No. 6 to the battery (-) terminal. Then apply battery voltage.
3.Check for continuity between the selector lever assembly connector terminals No. 4 and No. 5.
Jumper wire
Continuity between terminals No. 4 and No. 5
Connect
Yes (2 Ω or less)
Disconnect
No