|
1.Remove the CVT control relay.
|
|
2.Use a jumper wire to connect the positive battery terminal (+) to the CVT control
relay terminal No. 2, and the negative battery terminal (-) to the terminal No. 1. 3.Check for continuity between the CVT control relay terminals No. 3 and No. 4.
|
Jumper wire
|
Continuity between terminals No. 3 and No. 4
|
Connect
|
Yes (2 Ω or less)
|
Disconnect
|
No
|
|
4.If not as specified, replace the CVT control relay.
|