ASSEMBLY


caution The differential sub-assembly can be only assembled, but not disassembled.





Reassembly steps

>>A<<
 1.
 Differential case

>>A<<
 2.
 Final gear

ASSEMBLY SERVICE POINT

>>A<< DIFFERNTIAL CASE / FINAL GEAR INSTALLATION

caution When attaching the final gear to the differential case, make sure the side with the bigger distance from the edge to the flange A face the differential case.
Distance from gear edge to flange A
 Long
Distance from gear edge to flange B
 Short

Install the final gear on the differential case, and tighten the fastening bolts to the specified torque of 130 N·m.