|
1.Remove the filler plug. 2.Remove the drain plug and drain oil. 3.Tighten the drain plug to the specified torque. Tightening torque: 32 ± 2 N·m
|
|
4.Fill the oil until the level comes to the lower portion of the filler plug hole. Specified gear oil: MITSUBISHI MOTORS GENUINE super hypoid gear oil API classification
GL-5, SAE 80W Amount to use: approx. 0.4 L 5.Tighten the filler plug to the specified torque. Tightening torque: 32 ± 2 N·m
|