SPECIAL TOOLS


Tool
 Number
 Name
 Use



  1. MB992744
  2. MB992745
  3. MB992746
  4. MB992747
  5. MB992748
  1. Vehicle communication interface-Lite (V.C.I.-Lite)
  2. V.C.I.-Lite main harness A (for vehicles with CAN communication)
  3. V.C.I.-Lite main harness B (for vehicles without CAN communication)
  4. V.C.I.-Lite USB cable short
  5. V.C.I.-Lite USB cable long

 Check of the electronically controlled 4WD (the diagnosis code display, service data display, freeze frame data display, actuator test with M.U.T.-III)


MB991955

    a: MB991824
    b: MB991827
    c: MB991910
    d: MB991911
    e: MB991825
    f: MB991826
 M.U.T.-III sub-assembly

    a: Vehicle communication interface (V.C.I.)
    b: USB cable
    c: M.U.T.-III main harness A (applicable to vehicles with CAN communication)
    d: M.U.T.-III main harness B (applicable to vehicles without CAN communication)
    e: Measurement adapter
    f: Trigger harness
caution For vehicles with CAN communication, use the M.U.T.-III main harness A to send the simulated vehicle speed. If you connect the M.U.T.-III main harness B instead, the CAN communication does not function correctly.
Check of the electronically controlled 4WD (the diagnosis code display, service data display, freeze frame data display, actuator test with M.U.T.-III)


MB991223

    a: MB991219
    b: MB991220
    c: MB991221
    d: MB991222
 Wiring harness set

    a: Check harness
    b: LED harness
    c: LED harness adapter
    d: Probe
 Continuity check and voltage measurement at the 4WD-ECU wiring harness connector


MB992006
 Extra fine probe