CHECK OF DRIVE MODE INDICATORS


WARNING INDICATOR


If a malfunction occurs in the electronically controlled 4WD system, either of the followings operates to alert you to check a diagnosis code.

  1. Standard meter

    • The drive mode indicators flash alternately <Protection condition>.
    • The drive mode indicators flash simultaneously <Fail condition>.
  2. High contrast meter

    • The current drive mode display on the multi-information display flashes, and a message is shown on the warning display (A) <Protection condition>.
    • The drive mode display on the multi-information display flashes, and a message is shown on the warning display (B) <Fail condition>.