|
Replace the back side bushing according to the following procedure.
|
|
1.Use the following special tools to remove the bushing:
- Arm bushing remover and installer (MB992119)
- Ring (MB990979)
- Rear suspension bushing base (MB990890)
|
|
2.Use the following special tools to locate the front suspension lower arm bushing protrusion
as shown in the figure. Press-fit the special tool until it reaches the lower arm assembly.
- Arm bushing installer (MD998375)
- Spacer base (MB992868)
- Suspension bushing base (MB990643)
|
)
)
)