REMOVAL AND INSTALLATION


Post-installation OperationCheck the dust cover for cracks or damage by pushing it with your finger.




Removal steps


1.
Stabiliser link

>>A<<
2.
Stabilizer bracket

>>A<<
3.
Bushing


·
Rear differential carrier assembly (Refer to GROUP 27B, Differential carrier assembly <4WD>.)

>>A<<
4.
Stabilizer bar

INSTALLATION SERVICE POINT



>>A<< STABILIZER BAR/BUSHING/STABILIZER BRACKET INSTALLATION



Position the identification mark of the stabilizer bar at the left side of the vehicle as shown in the figure, and tighten the stabilizer bracket mounting bolt.