|
1.Use the following special tools to remove the trailing arm bushing:
- Arm bushing remover and installer (MB992123)
- Spacer base (MB992865)
- Arm bushing base (MB992125)
|
|
2.Determine the installation direction and the installation position of the trailing arm
bushing.
(1)
Install so that the protruding side of the trailing arm bushing inner pipe faces inside
the body.
(2)
Position horizontally the trailing arm bushing to body connecting part, and locate
bushing inner space as shown in the figure.
|
|
3.Use the following special tools to press-fit the trailing arm bushing up to the position
shown in the figure:
- Arm bushing remover and installer (MB990890)
- Spacer base (MB992865)
- Arm bushing base (MB992125)
|
)
)
)