|
1.
| caution |
If there is a significant difference in thickness between
the brake pads at right and left, check the sliding area and the run-out of the brake disc (Refer
to  ).
|
Visually check the thickness of brake pad from the inspection hole of the caliper body.
Standard value: 10.0 mm
Limit: 2.0 mm
2.If the brake pad thickness is less than the limit value, replace the brake pad (Refer
to ).
|
|
1.
| caution |
If there is a significant difference in thickness between
the brake pads at right and left, check the sliding area and the run-out of the brake disc (Refer
to ).
|
Visually check the thickness of brake pad from the inspection hole of the caliper body.
9.0 mm
1.5 mm
2.If the brake pad thickness is less than the limit value, replace the brake pad (Refer
to ).
|
)
)
)