Code No. C1395 Incomplete Brake fluid filling

caution

If there is any problem in the CAN bus lines, an incorrect diagnosis code may be set. Prior to this diagnosis, diagnose the CAN bus lines (Refer to GROUP 54C - CAN Bus Diagnostics Table

DIAGNOSIS CODE SET CONDITIONS

This diagnosis code is set when the brake fluid is not filled in the hydraulic unit.

PROBABLE CAUSES

Different hydraulic unit (For delivery to factory)
ABS-ECU malfunction

DIAGNOSTIC PROCEDURE

STEP 1. M.U.T.-III CAN bus diagnostics

Use M.U.T.-III to diagnose the CAN bus lines.

Q. Is the check result normal?

	Go to Step 2.

	Repair the CAN bus lines (Refer to GROUP 54C - CAN Bus Diagnostics Table ). On completion, go to Step 2.

STEP 2. Check whether the diagnosis code is reset.

Erase the diagnosis code.

Q. Is the diagnosis code No. C1395 set?

	Replace the hydraulic unit (integrated with ABS-ECU) (Refer to ).

	This diagnosis is complete.