Code No. C2200 ECU internal error



caution
  • If there is any problem in the CAN bus lines, an incorrect diagnosis code may be set. Prior to this diagnosis, diagnose the CAN bus lines (Refer to GROUP 54C - CAN Bus Diagnostics Table ).
  • Whenever ECU is replaced, ensure that the CAN bus lines are normal.

OPERATION


ASC-ECU controls ASC by calculating the data sent from the wheel speed sensor, the steering wheel sensor, and the G and yaw rate sensor.

DIAGNOSIS CODE SET CONDITIONS


This diagnosis code is set when ASC-ECU has malfunction.

PROBABLE CAUSES


ASC-ECU malfunction

DIAGNOSTIC PROCEDURE


Check whether the diagnosis code is reset.


Erase the diagnosis code.

Q. Is the diagnosis code No. C2200 set?

Replace the hydraulic unit (integrated with ASC-ECU) (Refer to ).
This diagnosis is complete.