|
AS&G-related signals are sent or received to and from between ASC-ECU and AS&G-ECU
via CAN bus lines.
|
|
This diagnosis code is set when the AS&G-ECU malfunction has been detected.
|
|
- Malfunction of AS&G-ECU
- Malfunction of ASC-ECU
- External noise interference
|
|
Use M.U.T.-III to diagnose the CAN bus lines.
|
|
Q.
Is the check result normal?
|
|
Repair the CAN bus lines (Refer to GROUP 54C - CAN Bus Diagnostics Table ).
On completion, go to Step 5.
|
|
|
|
Use M.U.T.-III to check that any diagnosis code other than the code No.U0404 is set in
ASC-ECU.
|
|
Q.
Is the diagnosis code set?
|
|
Troubleshoot the relevant diagnosis code, and then go to Step 5.
|
|
|
|
Use M.U.T.-III to check that the diagnosis code is set by the AS&G-ECU.
|
|
Q.
Is the diagnosis code set?
|
|
Troubleshoot the relevant diagnosis code, and then go to Step 5.
|
|
|
|
Erase the diagnosis code.
|
|
Q.
Is diagnosis code No.U0404 set?
|
|
Replace the hydraulic unit (integrated with ASC-ECU) (Refer to ),
and then go to Step 5.
|
|
|
|
Intermittent malfunction (Refer to GROUP 00 - How to Use Troubleshooting/How
to Cope with Intermittent Malfunctions ).
|
|
|
|
Erase the diagnosis code.
|
|
Q.
Is diagnosis code No.U0404 set?
|
|
This diagnosis is complete.
|
|
|