REMOVAL AND INSTALLATION


caution Do not apply grease or lubricant to the switch and the switch installation section to avoid malfunction of the switch. In addition, do not use gloves which have grease on them.
Pre-removal operationRear Floor Console Assembly Removal (Refer to GROUP 52A - Rear Floor Console ).
 Post-installation operation
  • Parking Brake Lever Stroke Check (Refer to ).
  • Rear Floor Console Assembly Installation (Refer to GROUP 52A - Rear Floor Console ).




Removal steps


·
 Release the parking brake lever.


·
 Loosen the adjusting nut.


1.
 Parking brake switch connector connection


2.
 Parking brake rear cable assembly connection


3.
 Parking brake lever assembly


4.
 Parking brake switch


5.
 Adjusting nut