REMOVAL AND INSTALLATION


Pre-removal and post-installation operation
  • Splash shield front removal and installation (Refer to .)
  • Headlamp assembly removal and installation (Refer to GROUP 54A - Headlamp .)
  • Side turn-signal lamp removal and installation (Refer to GROUP 54A - Side turn-signal lamp .) <Fender panel type>
  • Front deck garnish removal and installation (Refer to GROUP 51 - Windshield Wiper .)
  • Side air dam removal and installation (Refer to GROUP 51 - Side Air Dams .)




Removal steps


1.
 Pad <Optional>


2.
 Fender protector rear

>>A<<
 3.
 Fender

INSTALLATION SERVICE POINT

>>A<< FENDER INSTALLATION

While being careful not to touch the fender protector rear as shown, tighten the fender mounting bolts to 5.0 ± 2.0N·m.