REMOVAL AND INSTALLATION



Waterproof film removal steps 


·
 Door trim assembly (Refer to GROUP 52A - Door Trim .)

>>A<<
 1.
 Waterproof film



Door window glass runchannel removal steps


2.
 Door window glass runchannel



Door beltline weatherstrip inner removal steps


·
 Door trim assembly (Refer to GROUP 52A - Door Trim .)


3.
 Door beltline weatherstrip inner



Door speaker cover removal steps <Vehicles with audio amplifier> 


·
 Door trim assembly (Refer to GROUP 52A - Door Trim .)

>>A<<
 1.
 Waterproof film


4.
 Door speaker cover



Door beltline moulding removal steps


·
 Door mirror assembly (Refer to GROUP 51 - Door Mirror .)


5.
 Door beltline moulding



Door opening weatherstrip lower removal


6.
 Door opening weatherstrip lower



Door speaker bracket removal steps <Vehicles with audio amplifier> 


·
 Door trim assembly (Refer to GROUP 52A - Door Trim .)

>>A<<
 1.
 Waterproof film


7.
 Door speaker bracket



Front lower sash removal steps


·
 Door trim assembly (Refer to GROUP 52A - Door Trim .)

>>A<<
 1.
 Waterproof film


7.
 Door speaker bracket <Vehicles with audio amplifier>


8.
 Front lower sash


9.
 Door window glass runchannel rear



Door opening weatherstrip inner removal steps


·
 Cowl side trim and front scuff plate (Refer to GROUP 52A - Interior Trim .)


10.
 Door opening weatherstrip inner



Door opening weatherstrip outer removal steps


11.
 Door check connecting bolt
<<A>>
12.
 Door opening weatherstrip outer





Waterproof film removal steps 


·
 Door trim assembly (Refer to GROUP 52A - Door Trim .)

>>B<<
 1.
 Waterproof film



Door window glass runchannel removal


2.
 Door window glass runchannel



Door beltline weatherstrip inner removal steps


·
 Door trim assembly (Refer to GROUP 52A - Door Trim .)


3.
 Door beltline weatherstrip inner



Door speaker cover A removal steps <Vehicles with audio amplifier>


·
 Door trim assembly (Refer to GROUP 52A - Door Trim .)

>>B<<
 1.
 Waterproof film


4.
 Door speaker cover A



Door beltline moulding removal


5.
 Door beltline moulding



Door opening weatherstrip lower removal


6.
 Door opening weatherstrip lower



Door speaker cover B removal steps <Vehicles with audio amplifier>


·
 Door trim assembly (Refer to GROUP 52A - Door Trim .)

>>B<<
 1.
 Waterproof film


7.
 Door speaker cover B



Rear lower sash removal steps


·
 Door trim assembly (Refer to GROUP 52A - Door Trim .)

>>B<<
 1.
 Waterproof film


7.
 Door speaker cover B <Vehicles with audio amplifier>


8.
 Rear lower sash



Door opening weatherstrip inner removal steps


·
 Rear scuff plate (Refer to GROUP 52A - Interior Trim .)

>>A<<
 9.
 Door opening weatherstrip inner



Door opening weatherstrip outer removal steps


10.
 Door check connecting bolt
<<A>>
11.
 Door opening weatherstrip outer

REMOVAL SERVICE POINT

<<A>>DOOR OPENING WEATHERSTRIP OUTER REMOVAL

Make the tool as shown in the figure, and remove the weatherstrip from the door panel.

INSTALLATION SERVICE POINTS

>>A<< DOOR OPENING WEATHERSTRIP INNER INSTALLATION


Align the mark on the door opening weatherstrip inner with the notch at the vehicle bode side as shown.

>>B<< WATERPROOF FILM INSTALLATION

caution When a waterproof film is applied, guide the butyl rubber tape under the inner panel drain hole.
Apply the specified adhesive to the water-proof film as shown in the figure and stick the film.
Specified sealant: 3M ATD Part No. 8625 or equivalent