REMOVAL AND INSTALLATION


Post-installation operation<Roof lid glass assembly and sunroof assembly>

  • Sunroof leakage check (Refer to .)
  • Sunroof alignment (Refer to .)
  • Learning procedures for sunroof fully closed position (Refer to .)




Sunroof switch removal


·
 Front room lamp (Refer to GROUP 54A - Interior lamp .)



Sunroof lid glass assembly removal


1.
 Sunroof lid glass assembly


2.
 Sunroof lid weatherstrip


3.
 Sunroof lid glass



Sunroof motor assembly removal steps


4.
 Sunroof motor assembly



Sunroof assembly removal steps


5.
 Drain pipe connection
<<A>>
6.
 Sunroof assembly



Drain pipe removal steps


·
 Headlining (Refer to GROUP 52A - Headlining .)


·
 Splash shield front (Refer to .)

>>A<<
 7.
 Front drain pipe


·
 Splash shield rear (rear bumper side) (Refer to .)

>>A<<
 8.
 Rear drain pipe

REMOVAL SERVICE POINT

<<A>> SUNROOF ASSEMBLY REMOVAL

Use a pair of long nose pliers or the like to remove the sunroof assembly while turning it in the direction shown in the figure.

INSTALLATION SERVICE POINT

>>A<< FRONT DRAIN PIPE/REAR DRAIN PIPE INSTALLATION

Install the grommet, and adjust the drain pipe projection as shown.