Before replacing the ECU,
ensure that the input and output signal circuits are normal.
COMMENTS ON TROUBLE SYMPTOM
Current trouble
If the roof lid glass position is out of the specified area, ETACS-ECU sets the
diagnosis code No. L0637.
PROBABLE CAUSES
Malfunction of the sunroof motor assembly
DIAGNOSTIC PROCEDURE
STEP 1. Check the sunroof fully closed position
(1)Carry out the learning procedures of the sunroof fully closed position. Refer to .
(2)Recheck if the diagnosis code is set.
.....
Erase the diagnosis code.
.....
Turn the ignition switch from the LOCK (OFF) position to the ON position.
.....
Check if the diagnosis code is set.
Q.
Is the check result normal?
The diagnosis is complete.
Go to Step 2.
STEP 2. Diagnosis code recheck
Recheck if the diagnosis code is set.
(1)Erase the diagnosis code.
(2)Turn the ignition switch from the LOCK (OFF) position to the ON position.