|
|
Check the system as described below. If the system does not work, carry out troubleshooting.
Refer to  .
|
|
|
- Operate the transmitter to check that the doors can be locked and unlocked.
- Operate the transmitter to check when the door locking or unlocking operation is
performed that the hazard warning lamp [lock: flash once, unlock: flash twice (default
setting)]
and room lamp [lock: flash once, unlock: illuminates for 15 seconds
(default setting)]
answer back operates. Refer to .
| note |
- The customisation function allows you to change the answerback setting as follows.
Prior to that check, confirm which setting is activated.
- The hazard warning lamp flash once when locked and twice when unlocked (default
setting).
- The hazard warning lamp flash once when locked and do not flash when unlocked.
- The hazard warning lamp do not flash when locked and flash twice when unlocked.
- The hazard warning lamp do not flash when both locked and unlocked.
- The hazard warning lamp flash twice when locked and once when unlocked.
- The hazard warning lamp flash twice when locked and do not flash when unlocked.
- The hazard warning lamp do not flash when locked and flash once when unlocked.
|
|